FINAL EXAM Introduction of BIM enabled EPC assessments – Online course

To pass the course 80 % of the answers must be correct. In case you wish proof of passing the exam into your e-mail, add the needed information in the end of exam right before submitting. Certification of passing the exam is then automatically sent. Automated feedback is provided to all users on this page. Good luck!

1. 

Which of the file-formats below enable interoperable transfer of EPC information between different BIM programmes?

2. 

In traditional methods, what barriers exist for comprehensive use of different building energy analysis?

3. 

Model Checkers can be utilized in EPC assessment for:

4. 

Special requirements for BIM modeling are not needed, if inter-operable file-formats are used for the energy simulations.

5. 

In assessing EPC for the standard use of the building the following input data is often fixed:

6. 

EPC assessment method is never dependent of the building type, same calculation method apply to all buildings.

7. 

Utilization of the geometry obtained from the BIM model is one of the biggest denominators for faster EPC assessment.

8. 

In cases IFC-file is directly imported from BIM to energy simulation software, what kind of EPC data can then usually be transferred?

9. 

In BIM-based projects all disciplines such as architects and HVAC-engineers work together on the same BIM model.

10. 

EPC calculators are based on equations reflecting the real world phenomena, such as thermodynamic equations.

11. 

BIM cannot be used for EPC assessments in existing buildings.


Name Email